Ar turite kokių nors klausimų?
Paklauskite konsultanto

Atbulinės Osmozės RO filtrai WATEX WRO2000

Gamintojas: WATEX
Prekės kodas: WRO2000
Šāda kombinācija neeksistē
WATEX WRO2000
 
Reverse osmosis system for brackish water with flow rate 2000 liters/hour.
 
WATEX WRO series reverse osmosis systems are used for low mineralised water (up to 4000 ppm) with different flow rates and installation possibilities (wall or ground mount). Reverse osmosis systems purify water from 99% of salts, pyrogenic substances and microorganisms.
 
Permeate quality depends on intake water salt quantity, temperature, applied pressure, membrane selection and pretreatment.
 
Pretreatment required mechanical filtration, adsorption by activated carbon (Chloride presence), softening or antiscalant dosing.
 
 
Technical parameters
 
Unit
Model
WATEX  WRO2000
Flow rate * Qnom
Liters/hour
2000
Flow rate * Qmax
m3/day
48
Recovery max
%
70
Operating pressure max
bar
15
System size (Length x Height x Width) 
m
2.0 x 1.65 x 0.6
 
 
Element quantity x size
inches
4 x 4
Water - drain connection
mm
25,20,15
Weight
kg
 
System frame
Stainless steel AISI304
High pressure pump
Brass
Piping system
PVC or PE PN16
Inlet filter
 PP 5 micron cartridge
Quality control
Electroconductivity meter, alarm system
Leakage alarm
included
Control system
Min. pressure switch, manometers, flow meters
 
After osmosis required: clean water reservoir minimum 500 liters and booster pump.
Reverse osmosis valve need connection to drain, electric supply.
 
OPTIONAL FEATURES
+ CIP station and tank for chemical cleaning of membranes
+ Dosing station for chemical pretreatment
+ PLC operating controller and SCADA vizualization
+ High pressure switch
+ Electromagnetic flow meters
+ Temperature switch
+ Stainless steel pipes and fittings (AISI304, AISI316)
+ Pretreatment built-in
+ Dry-run protection of the reverse osmosis pump.
Rodyti visą aprašymą

Plotis cm

Aukščio cm

Ilgis cm

Svorio kg

100.00

180.00

200.00

280.00

Rodyti visą aprašymą
Rodyti visą aprašymą