Iron removal filter WATEX RCMB16

Manufacturer: WATEX

Product code: RCMB16

In stock:

Delivery time: 2-5 working days

A simple solution for 5 problems - turbidity, iron, manganese, odour, arsenic
Regeneration does not require reagents - no salt, no potassium permanganate (KMnO₄)
Effective working even at low pH and high content of organics
High filtration capacity
Easy installation and operation
Filter service life is more than 10 years
Natural, environmentally friendly filtration process. Do not impair the water quality
Automatic purification and regeneration
High quality materials, components
Applicable for private houses, cottages, guesthouses, farms

WATER QUALITY PROBLEM

Iron and manganese often causes the main problem of the waterworks. When water gets in contacts with air, it changes the colour, turbidity increases and sediments appears. Water has a metallic taste. Water pipes are clogged and sanitation at the consumer becomes dirty.

SOLUTION

The best solution for this problem is oxidation and sand filtration. WATEX RCMB series filters are designed to purify water from turbidity, iron, manganese and odor for private houses. Mainly it is used for groundwater purification.

OPERATING PRINCIPLE

RCMB filter operating principle is based on aeration and filtration. When water is aerated, iron, manganese and mechanical impurities form sediment, which can be filtered. Suspended solids are filtered through filtration media, which has been poured in to filter. Filters depending on pollution levels and water consumption have to be rinsed regularly. Filters after rinsing are regenerated and can purify water. Equipment consists from aeration, filter and oilless compressor.

Show full description

Technical parameters of equipment	Unit	Model
Technical parameters of equipment	Unit	RCMB13	RCMB14	RCMB16
Flow rate Q_nom	m³/h	1.3	1.5	1.8
The amount of water for regeneration	m³	0.17	0.20	0.24
Minimum flow rate for rinsing	m³/h	2.6	3.0	3.6
Tank size (diameter)	inches	13	14	16
Tank size (diameter)	m	0.33	0.37	0.41
Tank volume	liters	110	145	183
The amount of filtration media	liters	73	97	122
Dimensions
Length	m	1.29	1.37	1.53
Width	m	0.33	0.37	0.41
Height	m	1.57	1.87	2.04
Water - drain connection	inches	1”	1 ¼”	1 ¼”
Filtration		Iron, manganese, turbidity, odor
Tank material		FRP (fiberglass)
Filtration media		АquaMandix, silica sand 0.4x0.8 mm, 0.7x1.25 mm, 1x3 mm, 3x5 mm
Operating pressure	bar	2-6
Electric Connection		220V, 50Hz, 1 phase
Electricity consumption	W	3 W

PRECONDITIONS

Sewer and electricity 220V connection
Input water pressure with a minimum pressure of 2.5 bar
Room temperature above 0° C
Water temperature up to 25° C
Correct system installation

SYSTEM MAINTENANCE

Filter will provide with good quality water if operating personnel will ensure proper air supply, and unnecessary air removal and regular rinsing processes. Water filter does not require specific chemical reagents that have to be refilled.

PRESSURE TANK

Pressure filter tanks are made from fiberglass with inner PE coating that can hold pressure up to PN10.

FILTRATION MEDIA

For water purification filtration media AquaMandix and quartz sand with different grain size (0.4-0.8 mm, 0.7-1.25 mm, 1-3 mm, 3-5 mm) is being used. Porous structure of AquaMandix provides a large active surface and provides efficient adsorption and accumulation of sediment.

CONTROL VALVE

The filter is equipped with an automatic Clack control valve which performs filtering and rinsing sequences automatically. Usually rinsing is performed at 2:00 at night.

AIR SUPPLY

For water aeration it is necessary to install oilless air compressor. Air is pumped in the water before it enters aeration tank.

ADDITIONAL EQUIPMENT OPTIONS: