RO75GPD+S drinking water filter is filtration system with 5 stages of purification, including mechanical, activated carbon and reverse osmosis. Water if purified from rust, scale, chlorinated organic and organic pollution, heavy metal compounds, nitrites, nitrates, ammonia, pesticides, and etc. harmful impurities. The water has improved taste and liquidated odour. Water is purified from bacteriological contamination too - microorganisms, bacteria and viruses. Water after filtration has a low degree of mineralization.
Water filter characteristics:
The unit is equipped with an automatic shut-off valve that cuts off the flow to the sewer after filling the water tank. This allows an economical use of resources. The reverse osmosis membrane can be manually flushed, which provides a longer service life compared to traditional systems.
5-STAGE WATER TREATMENT
1. The polypropylene cartridge (5μm) - performs protecting function of the reverse osmosis membrane from mechanical particles (sand, scale, rust and sediment).
2. Carbon cartridge - for protection of reverse osmosis membrane from the removal of free chlorine and organic compounds, flavours, smells, colours.
3. Polypropylene Cartridge (1 µm) – for protection of osmosis membrane from activated carbon dust and to prolong its life service.
4. The reverse osmosis membrane (pore diameter 0,0001μm) - the basic element of water purification. Cleans drinking water from scale, bacteria, viruses, organic matter, colloids, pesticides, radioactive particles, microbes, algae, heavy metals and dissolved minerals.
5. Carbon post-filter - designed to improve the organoleptic characteristics issued on water consumption.
In addition, it is possible to install a mineralizer to raise the pH level and enrich it with minerals.
|
RO75GPD+S |
|
Completion |
With booster pump |
|
Flow rate* |
11.7 litres/hour |
|
280 litres/day |
||
Incoming water pressure |
1 – 4 bar |
|
Incoming water |
From the central water supply system or underground water without iron |
|
Necessary connections |
Water supply, sewerage and electricity 220V |
|
Size of installation (length x width x height) |
|
422 x 200 x 467 mm |
Size of purified water tank |
diameter 240 mm x height 350 mm |
|
Filter weight (empty) |
8.5 kg |
|
Volume of purified water in the tank |
~5 litres |
|
Electricity consumption |
24 W |
|
The ratio of membrane rinsing water – clean: rinsing** |
1:3 |
* Equipment flow rate depends on the incoming water pressure, temperature and salt concentration.
** Rinse volume to sewage decreases at higher input pressure.
SET INCLUDES
Filter for purification of drinking water
The tank for purified water (8 litres)
Tap for drinking water
Key for the installation of the filter
Materials for the installation
Instructions for installation and use
HOW OFTEN EXCHANGE ELEMENTS
1-3: degree of purification (meh. filter 5 µm + carbon + meh. filter 1 µm) once in 6 -12 months.
4: reverse osmosis membrane once in 2 years or after flow reduction
5: carbon post-filter element once a year.
Element replacement frequency depends on the water consumption and incoming water quality.
The quality of all equipment components and their testing methods, fully compliant with the NSF (National Science Foundation) requirements to ensure high effectiveness in the long term.
Width cm |
Height cm |
Length cm |
Weight kg |
---|---|---|---|
46.00 |
20.00 |
44.00 |
16.00 |